User manual

• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
12.2 Stainless steel or aluminium
appliances
Clean the oven door with a
wet sponge only. Dry it with a
soft cloth.
Do not use steel wool, acids
or abrasive materials as they
can damage the oven
surface. Clean the oven
control panel with the same
precautions.
12.3 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
2
1
Install the shelf supports in the opposite
sequence.
12.4 Removing and installing the
oven glass panels
You can remove the internal glass panels
to clean it. The number of glass panels is
different for different models.
WARNING!
Keep the oven door slightly
open during the cleaning
process. When you open it
fully it may accidentally close
causing potential damage.
WARNING!
Do not use the appliance
without the glass panels.
1. Open the door until it is at an angle of
approximately 30°. The door stands
alone when slightly open.
30°
2. Hold the door trim (B) at the top edge
of the door on both sides and push
inwards to release the clip seal.
1
2
B
3. Pull the door trim to the front to
remove it.
ENGLISH
17