Service manual

25
Before the washer is removed from service
or discarded, remove the washer door to prevent accidental
entrapment.
Failure to comply with these warnings could result in
serious personal injuries.
Avoid fire hazard or electrical shock.
Do not use an adaptor plug or extension cord or
remove grounding prong from electrical power
cord. Failure to follow this warning can cause
serious injury, fire or death.
CORRECT
Use this way ONLY
Do not use or mix liquid chlorine
bleach with other household chemicals such as
toilet cleaners, rust removers, acid or products
containing ammonia. These mixtures can produce
dangerous fumes which can cause serious injury or
death.
Note: The instructions appearing in this Owner's Guide
are not meant to cover every possible condition and
situation that may occur. Common sense and caution
must be practiced when installing, operating and
maintaining any appliance.
Prevent Injury
To prevent shock hazard and assure
stability during operation, the washer must be installed
and electrically grounded by a qualified service person in
accordance with local codes. Installation instructions
are packed in the washer for installer's reference.
Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures. If the washer is moved to a new
location, have it checked and reinstalled by a qualified
service person.
To prevent personal injury or damage to
the washer, the electrical power cord of the washer must
be plugged into a properly grounded and polarized 3-
prong outlet. The third grounding prong must never
be removed. Never ground the washer to a gas
pipe. Do not use an extension cord or an adaptor
plug.
Follow package directions when using
laundry products. Incorrect usage can produce poisonous
gas--resulting in serious injury or death.
• Do not combine laundry products for use in 1 load
unless specified on the label.
• Do not mix chlorine bleach with ammonia or acids
such as vinegar.
To prevent serious personal injury and
damage to the washer:
• All repairs and servicing must be performed by
an authorized servicer unless specifically
recommended in this Owner's Guide. Use only
authorized factory parts.
• Do not tamper with controls.
• Do not install or store the washer where it will be
exposed to the weather.
• Do not install on carpet. Install washer on a solid
floor. It may be necessary to reinforce the floor to
prevent vibration or movement.
To reduce the risk of electric shock,
disconnect this appliance from the power supply before
attempting any user maintenance. Turning the controls
to the OFF position does not disconnect this appliance
from the power supply.
To prevent injury, do not reach into the
washer while parts are moving. Before loading, unloading
or adding items, push in the cycle selector knob and
allow the drum to coast to a complete stop before
reaching inside.
Grounding
type
wall receptacle
Power supply cord with 3-prong
grounding plug
Do not under any
circumstances, cut,
remove, or bypass the
grounding prong from
this plug.