Service manual

Detergent drawer disassembly:

1. Remove the drawer from the washer.

2. The liquid bleach and fabric softener inserts lift off.

When reinstalling be sure to seat them properly and

in the correct location.

3. To remove the drawer front release the three tabs

and pull the drawer front away from the body. When

replacing the drawer front always remember to

transfer the reed switch magnet.

SECTION G - TEARDOWN

This section will describe how to remove components

from the washer. Unless stated, reverse the procedure

to reinstall the component.

Always remove electrical power from

the washer when working in an area where electrical

power is present.

Always turn the water off to the washer

before disconnecting any hoses.

Removing the detergent drawer:

1. Slide the safety latch lever to the right and pull the

drawer out until it hit the stop.

2. Push down on the release tab and pull the drawer

the rest of the way out.

Lever

Release latch

Release the three tabs