Service manual

To remove loading door and hinge:

1. Remove the door by removing the (2) screws

holding the hinge to the washer front.

2. Lift the door and hinge up to disengage the hinge tab

from the washer front and remove the door and hinge.

Disassembling the door:

1. Remove the (4) screws holding the two half of the

door together (2) at the hinge, (1) at the top and (1)

at the bottom .

3. Using two flat bladed screwdrivers place one in the

cavity by the latch and one in cavity by the top screw

and gently pry the cover off.