User manual

• The indicator still flashes.
• The display shows the current
setting:
= the rinse aid empty
notification is activated (factory
setting).
2. Press
to change the setting.
= the rinse aid empty notification is
deactivated.
3. Press on/off to confirm the setting.
4.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press .
• The indicators , , and
are off.
• The indicator
still flashes.
• The display shows the current
setting:
–
= Acoustic signal off.
– = Acoustic signal on.
2. Press to change the setting.
3. Press on/off to confirm the setting.
4.5 How to set the colour of the
TimeBeam
Make sure the appliance is in user mode.
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
1. Press .
• The indicators , , and
are off.
• The indicator
still flashes.
• The display shows a number and
letter C. Each number refers to a
different colour.
– = TimeBeam
deactivated.
2. Press repeatedly to change the
colour.
3. Press on/off to confirm the setting.
4.6 AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding Vorspülen (if
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
www.electrolux.com8