User manual

care and cleaning electrolux 35
External cleaning
Clean the external surfaces of the
machine and control panel with a
damp soft cloth. If necessary use only
neutral detergents. Never use
abrasive products, scouring pads or
solvent (acetone, trichloroethylene
etc...).
● Polished chromium steel
surfaces
Remove light dirt with a clean,
damp, soft cloth. Microfibre cloths
are particularly good.
When cleaning ensure that you do not
go against the direction of the
stainless steel finish (the fine
horizontal lines).
No circular movements!
● Aluminium look surfaces
Remove light dirt with a clean,
damp, soft cloth. Microfibre cloths
are particularly good.
● Agents that scratch or scour are
not suitable.
● If required, use a commercially
available cleaner for chrome
surfaces. Follow the
manufacturer’s instructions when
using these products.
Internal cleaning
Ensure that the seals around the
door, the detergent and rinse aid
dispensers are cleaned regularly with
a damp cloth.
We recommend every 3 months to
run the wash programme for heavy
soiled dishes using detergent but
without dishes.
3. Clean the spray arm and the fixing
screw.
4. Fasten the spray arm with the
fixing screw (B) by turning it
clockwise.
Lower spray arm
1. Undo the fixing screw (B) by
turning it anti-clockwise.
2. Pull the spray arm off the shaft.
B
Upper basket spray arm
1. Remove the upper basket spray
arm by turning it laterally.
2. Clean spray arm nozzles.
3. To replace the spray arm, press
upwards until you feel it snap into
place.
117986 53/1en 16-06-2007 10:38 Pagina 35