User manual

26 electrolux daily use
Set and start a washing programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Close the dishwasher door.
4. Press the On/Off button.
5. Select the washing programme.
6. If required, postpone the start time
of the washing programme. Press
OK to confirm the delay.
7. Set, if required, the options. (See
‘Option button’ - ‘How to set the
options’).
If you select the options:
ANTIBACTERIAL, HALF LOAD,
ECO DRY and EXTRA RINSE;
remember to verify that they are
available with the set washing
programme. (See ‘Washing
programmes’).
8. Press OK, the washing
programme or the delay start
countdown will start automatically.
Once the delay start has elapsed
the programme will start
automatically.
The opening of the door will interrupt
the countdown of the delay start.
Close the door; the countdown will
continue from the point at which it
was interrupted.
If the message CLOSE FILTER is
displayed, the filters are not
positioned correctly.
Check that the filters fit perfectly. See
‘Care and cleaning’.
If filling with rinse aid and/or salt is
necessary, the refilling messages will
appear in the display and the washing
programme or the delay start will not
begin after having pressed the OK
button.
It is anyway possible to carry out the
washing programme or the delay start
by pressing the OK button again.
If the last operation carried out is the
setting of the options; to start the
programme it is necessary to return to
washing programme mode.
Press programme selection button.
Cancel a delay start in progress
● Press Cancel button.
● The message CONFIRM
CANCEL? is displayed.
● Press OK button to confirm.
● The set washing programme will
start automatically.
117986 53/2en 23-01-2009 14:21 Pagina 26