User manual

5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
P1
Eco
9.9 0.736 239
P2
AutoSense
7 - 12 0.6 - 1.4 50 - 163
P5
ProZone
13 - 14 1.2 - 1.5 150 - 160
P3
Intensiv / Intensif
12.5 - 14.5 1.4 - 1.7 175 - 190
P6
Gläser / Verre
10 - 12 0.9 - 1.0 70 - 80
P4
30 Min
10 0.7 30
P8
Vorspülen / Prélav‐
age
4 0.1 14
P7
ExtraSilent
8 - 10 1.1 - 1.2 225 - 235
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
[e-mail]
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. SETTINGS
6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Selection of the colour of the
TimeBeam.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
ENGLISH 9