Quick Guide

DAILY USE CARE AND CLEANING
Cleaning lters
Dirty lters decrease washing results.
Presented pictures show how to
disassemble and reassemble the
lters. An incorrect position of the
lters may cause bad washing results
and damage to the appliance.
Internal cleaning
During manual cleaning, clean
the rubber gasket of the door.
Run Machine Care programme
at least once every 2 months
with a descaler or a cleaning
product designed for dishwashers
and without any load.
External cleaning
Clean the appliance with a moist, soft
cloth. Do not use abrasive products,
abrasive cleaning pads or solvents.
1.
4.
2.
5.
3.
6.
1. Press the button. (A)
2. Insert detergent or tablet into
the compartment. (B)
3. If you want to choose a programme
with prewash phase, put a small
quantity of detergent on the inner
part of the appliance door.
4. Close the lid.
1. Open the salt container (turn the cup counterclockwise).
2. Fill the container with dishwasher salt using proprietary
funnel supplied with the appliance.
Add 1 litre of water rst if the dishwasher
will be used for the rst time.
3. Remove the salt around the opening of the salt container.
4. Turn the cap of the container clockwise to close it.
Set the level of water softener according to the water
hardness in your area. From level 1 to level 10.
Filling rinse aid container Setting rinse aid level
Fill the rinse aid container before rst use and when the indicator is clear. (C)
1. Open the lid. (E)
2. Fill the container until marking
reaches MAX. (D)
3. Remove spilled rinse aid.
4. Close the lid.
Set the level of the rinse aid dispenser
according to the necessary quantity of rinse
aid.
Level 0, no rinse aid.
Level 6, maximum amount of rinse aid.
Using the detergent
Do not ll the detergent
container during rst use.
Filling the salt container.
AB
CD
E