Quick Guide

SAFETY INFORMATION TROUBLESHOOTING
Error codes
The appliance does
not ll with water.
or
• Make sure that the water tap is open.
• Make sure that the pressure of the water
supply is not too low. For this information,
contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the lter in the
inlet hose is not clogged.
• Make sure that the inlet hose
has no kinks or bends.
The appliance does
not drain the water.
• Make sure that the sink spigot is not clogged.
• Make sure that the lter in the
outlet hose is not clogged.
• Make sure that the interior lter
system is not clogged.
• Make sure that the drain hose
has no kinks or bends.
The anti-ood
device is on.
• Close the water tap and contact
an Authorised Service.
Water connection
Make sure not to cause damage to the water hoses.
• Before you connect the appliance to new pipes or pipes not used for a long
time, let the water ow until it is clean.
• The rst time you use the appliance, make sure that there is no leakage.
• The water inlet hose has a safety valve and a sheath with an inner mains
cable.
• Without electrical power, the water protection system is not active. In this
case there is a risk of ooding.
WARNING! Dangerous voltage.
If the water inlet hose is damaged, immediately close the water
tap and disconnect the mains plug from the mains socket. Contact
the Authorised Service Centre to replace the water inlet hose.
117875460-A-202018