User manual

daily use electrolux 27
Set and start a washing programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Close the dishwasher door.
4. Press the On/Off button.
5. Select the washing programme.
6. If required, postpone the start/end
time of the washing programme.
Press OK to confirm the delay.
7. Set, if required, the options. (See
“Option” button - “How to set the
options”).
If you select the options:
ANTIBACTERIAL, HALF LOAD,
ECO DRY and EXTRA RINSE;
remember to verify that they are
available with the set washing
programme. (See “Washing
programmes”).
8. Press OK, the washing
programme or the delay start
countdown will start automatically.
Once the delay start has elapsed
the programme will start
automatically.
The opening of the door will interrupt
the countdown of the delay start.
Close the door; the countdown will
continue from the point at which it
was interrupted.
If filling with rinse aid and/or salt is
necessary, the refilling messages will
appear in the display and the washing
programme or the delay start will not
begin after having pressed the OK
button.
It is anyway possible to carry out the
washing programme or the delay start
by pressing the OK button again.
If the last operation carried out is the
setting of the options; to start the
programme it is necessary to return to
washing programme mode.
Press washing programme button.
Cancel a delay start in progress
Press Cancel button.
The message CONFIRM
CANCEL? is displayed.
Press OK button to confirm.
The set washing programme will
start automatically.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress:
Open the dishwasher door; the
programme will stop. The message
PLEASE CLOSE DOOR is
displayed.
117989 21/1en 9-06-2007 11:39 Pagina 27