User manual

the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:set
the cooking zone with
touch or
.
•
To deactivate the Count Down Time:
set the cooking zone with
. Touch .
The remaining time counts back to
00
.
The indicator of the cooking zone goes
out.
When the timer countdown comes to an
end, the sound operates and
00
flashes.
The cooking zone deactivates.
•
To deactivate the sound: touch
The Count up timer
Use the Count up timer to monitor how
long the cooking zone operates.
•
The selection of the cooking zone (if
more than 1 cooking zone operates) :
touch
again and again until the indica-
tor of a necessary cooking zone comes
on.
When this function is activated,
comes
on.
• To activate the Count up timer:
Touch
The symbol goes out and comes
on.
•
To see how long the cooking zone
operates:set the cooking zone with
.
The indicator of the cooking zone starts
to flash quickly. The display shows the
time that the zone operates. The display
shows the time of the cooking zone that
operates for longer period of time.
• To deactivate the Count up timer: set
the cooking zone with
and touch
or to deactivate the timer. the symbol
goes out and comes on.
When the two Timer functions operate
at the same time, the display shows
the Count Up Timer first.
The Minute minder.
You can use the timer as a minute minder
while the cooking zones do not operate.
Touch
.
Touch
or of the timer to set the time.
When the time comes to an end, the sound
operates and
00
flashes.
•
To stop the sound: touch
STOP+GO
The
function sets all cooking zones that
operate to the lowest heat setting - Keep
Warm (
).
When
operates, you cannot change the
heat setting.
The
function does not stop the timer
function.
•
To activate this function touch
. The
symbol
comes on.
•
To deactivate this function touch
.
The heat setting that you set before
comes on.
LOCK
You can lock the control panel, but not
.
It prevents an accidental change of the heat
setting.
First set the heat setting.
To start this function touch
. The symbol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
.
THE CHILD SAFETY DEVICE
This function prevents an accidental opera-
tion of the hob.
Starting the Child Safety Device
•
Start the hob with
.Do not set the
heat setting.
•
Touch
for 4 seconds. The symbol
comes on.
•
Stop the hob with
.
Switching off the Child Safety Device
•
Start the hob with
.Do not set the
heat setting. Touch
for 4 seconds.
The symbol
comes on.
•
Stop the hob with
.
Overriding the Child Safety Device for
one cooking session
•
Start the hob with
. The symbol
comes on.
•
Touch
for 4 seconds. Set the heat
setting in less than 10 seconds. You
can operate the hob.
•
When you stop the hob with
, the
Child Safety Device operates again.
8 electrolux