User manual

Scratches or dark stains on the glass-
ceramic cause no effect on how the
appliance operates.
To remove the dirt:
1. – Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
–
Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
TROUBLESHOOTING
Problem Possible cause Remedy
You cannot activate or operate
the appliance.
The appliance is not connec-
ted to an electrical supply or it
is connected incorrectly.
Check if the appliance is cor-
rectly connected to the electrical
supply (refer to connection dia-
gram).
Activate the appliance again and
set the heat setting in less than
10 seconds.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
The STOP+GO function oper-
ates.
Refer to the chapter “Daily Use”.
There is water or fat stains on
the control panel.
Clean the control panel.
An acoustic signal sounds and
the appliance deactivates.
An acoustic signal sounds
when the appliance is deacti-
vated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The appliance deactivates. You put something on the sen-
sor field
.
Remove the object from the
sensor field.
The residual heat indicator
does not come on.
The cooking zone is not hot
because it operated only for a
short time.
If the cooking zone operated
sufficiently long to be hot, speak
to the service centre.
The Automatic Heat Up func-
tion does not operate.
The cooking zone is hot. Let the cooking zone become
sufficiently cool.
The highest heat setting is set. The highest heat setting has the
same power as the Automatic
Heat Up function.
electrolux 9