User manual

Auto‐
matic
light
Boil‐
ing
1)
Frying
2)
Mode H5 On Fan
speed 1
Fan
speed 2
Mode H6 On Fan
speed 2
Fan
speed 3
1)
The hob detects the boiling process and
activates the fan speed in accordance with
the automatic mode.
2)
The hob detects the frying process and
activates the fan speed in accordance with
the automatic mode.
3)
This mode activates the fan and the light
and does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds.
The display comes on and goes off.
3. Touch for 3 seconds.
4. Touch a few times until comes
on.
5. Touch of the Timer to select an
automatic mode.
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that
time the system deactivates the fan
automatically and prevents you from an
accidental activation of the fan for the
next 30 seconds.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
Operating the fan speed
manually
You can also operate the fan from the
hob manually.
Touch
when the hob is active.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually.
When you press
, you raise the fan
speed by one. When you reach an
intensive level and press again, you
set the fan speed to 0 which deactivates
the hood fan. To start the fan again with
the fan speed 1 touch
.
To activate an automatic
operation of the function,
deactivate the hob and
activate it again.
4.12 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob first.
1. Touch
for 3 seconds to activate
the function.
The display comes on and goes out.
2. Touch for 3 seconds.
or comes on.
3. Touch of the timer to choose one
of the following:
• - the sounds are off
• - the sounds are on
4. Wait until the hob deactivates
automatically to confirm your
selection.
When the function is set to you can
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
4.13 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
www.electrolux.com12