User manual

Scratches or dark stains on the glass
ceramic that cannot be removed do not
affect the functioning of the appliance.
Cleaning the appliance after each use
1. Food containing sugar, plastics, tin foil
residues should be removed at once us-
ing a scraper. Place a scraper on the
glass ceramic surface at an angle and re-
move residues by sliding the blade over
the surface. Wipe the appliance with a
damp cloth and a little washing up liquid.
Finally, rub the appliance dry using a
clean cloth .
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
Disposal
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Packaging material
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identified by
markings, e.g. >PE<, >PS<, etc. Please
dispose of the packaging materials in the
appropriate container at your local
waste disposal facilities.
What to do if ...
Problem/Display Possible Cause Remedy
The cooking zones cannot be
switched on or are not operating
More than 10 seconds have
passed since the appliance was
switched on
Switch the appliance on again.
The lock is switched on
Switch off the lock (See the sec-
tion “Locking/unlocking the con-
trol panel”)
The child safety device is switch-
ed on
Deactivate child safety device
(see the section "Child safety de-
vice")
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch-off has been
triggered
Remove any objects (pans, etc.)
that are lying on the control pan-
el. Switch appliance on again
There is water on the control
panel or the control panel is cov-
ered with fat splashes
Wipe the control panel
STOP+GO is activated
Switch off STOP+GO
Display is switching between
two heat settings
Power management is reducing
the power of this cooking zone
See the section “Switching the
power function on and off”
The residual heat indicator is not
displaying anything
The cooking zone was only on
for a short time and is therefore
not hot
If the cooking zone is supposed
to be hot, call your local Service
Force Centre.
12 electrolux