User manual

Display Description
The cooking zone is switched off
Keep Warm settings Keep Warm / STOP+GO function is switched on
-
Heat settings To set heat settings
Auto Warm-up The Auto Warm-up function is switched on
+ digit
Fault Malfunction has occurred
Pan detection Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Residual heat Cooking zone is still hot
Child safety device Lock/Child safety device is set
Power Power function is switched on
Automatic Switch off Switch off is active
Residual heat indicator
Warning! Risk of burns from residual
heat. After being switched off, the
cooking zones need some time to cool
down. Look at the residual heat indicator
.
Residual heat can be used for melting
and keeping food warm.
The induction cooking zones create the
heat required for cooking directly in the base
of the cookware. The glass ceramic is merely
heated by the residual heat of the cookware.
Operating the appliance
Use the induction cooking zones with
suitable cookware.
Switching the appliance on and off
Control panel Display Pilot light
Switch on
Touch for 1 second /
lights up.
Switch off
Touch for 1 second / none
goes out.
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
Control panel Display
To set the heat
setting
Touch the desired heat setting, if necessary, correct up
or down
/ to
Switch off
Touch
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Control panel Display
To switch on
Touch (for 4 seconds)
To switch off
Touch
previously set heat setting
electrolux 5