User manual

When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and
off
The STOP+GO function simultaneously tog-
gles all active cooking zones to keep-warm
mode then back to the heat setting they were
at before
Control panel Display
To switch on
Touch
To switch off
Touch
Previous heat setting (not automatic warm-up or power
function)
STOP+GO does not stop timer func-
tions.
STOP+GO controls the entire control
panel apart from the sensor field
.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm-up function. When setting a
heat setting using the automatic warm-up
function, the cooking zone switches to full
power for a certain amount of time and then
automatically switches back to the heat set-
ting set.
Step Control Panel Display
1.
Touch
2. Move your finger down from
to select the desired heat
setting between
and
/ after 5 seconds . As long as is
displayed, the appliance works at full power. After
the automatic warm up is completed, the heat set-
ting
/ is displayed again.
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
Heat setting Length of the automatic warm up [min:sec]
0:12
0:12
1:21
3:07
4:24
5:51
8:12
10:12
10:36
2:01
2:01
2:28
2:52
---
6 electrolux