User manual

5.6 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.
Touch
to activate the function for the
cooking zone.
The symbol turns red.
The function deactivates automatically.
For maximum duration
values, refer to "Technical
data".
5.7 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
Set the heat setting for the appropriate
cooking zone and then set the function.
1. Touch to activate the function or
change the time.
The timer digits and the indicators
and come on the display. turns
red, and turns white.
If the timer is not set, all indicators
disappear after 4 seconds.
2. Touch or to set the time (00 -
99 minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
,
, and disappear. stays red.
When the time comes to an end, a signal
sounds and flashes. To stop the
signal, touch .
To deactivate the function: touch . The
indicators and come on. Use or
to set on the display.
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
CountUp Timer (The count
up timer)
You can use this function to monitor how
long a cooking zone operates.
Touch
twice to activate the function.
The indicator turns red, the timer
starts to count up automatically.
To deactivate the function: touch .
When the indicators light up, touch .
Minute Minder
You can use this function when the hob
is activated but the cooking zones do not
operate.
To see the control panel, place a pot on
a cooking zone.
1. Touch
, until the indicator turns
red, to activate the function.
2. Touch
or to set the time.
The function starts automatically after 4
seconds. The indicators
, , and
disappear. stays red.
When you set the function, you can
remove the pot.
When the time comes to an end, a signal
sounds and
flashes. Touch to
stop the signal.
To deactivate the function: touch . The
indicators
and light up. Use or
to set on the display.
The function has no effect
on the operation of the
cooking zones.
5.8 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are
locked.
www.electrolux.com12