User manual

When the function is active, and
symbols can be used.
The function does not stop the timer
functions.
Touch
to activate the function.
The symbol turns red. The heat setting is
lowered to 1.
To deactivate the function, touch . The
symbol turns white. The previous heat
setting comes on.
5.9 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
Touch to activate the function.
The symbol turns red and blinks.
To deactivate the function, touch . The
symbol turns white.
When you deactivate the
hob, you also deactivate this
function.
5.10 Child Safety Device
This function prevents an accidental
operation of the hob.
Activate the hob first and do not set the
heat setting.
Touch until it turns red to activate the
function.
The control bars disappear. Deactivate
the hob.
When you deactivate the
hob, the function is still
active.
To deactivate the function for only
one cooking time: Activate the hob with
. comes on. Touch until it turns
white. The control bars appear. Set the
heat setting within 50 seconds. You can
operate the hob. When you deactivate
the hob with the function is still active.
To deactivate the function
permanently: Activate the hob and do
not set the heat setting. Touch until it
turns white. The control bars appear.
Deactivate the hob.
5.11 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to
a different position on the induction
cooking area.
The function divides the induction
cooking area into three areas with
different heat settings. The hob detects
the position of the cookware and adjust
the heat setting corresponding with the
position. You can place the cookware in
the front, middle or rear position. If you
place the cookware in the front you get
the highest heat setting. To decrease it,
move the cookware to middle or rear
position.
Use only one pot when you
operate the function.
If you want to change the
heat setting, lift up the
cookware and place it on a
different zone. Sliding the
cookware can cause
scratches and discolouration
of the surface.
Touch to activate the function.
The symbol turns red and the control bar
displays the default heat setting. All
cooking zones operate for 9 minutes.
After 9 minutes, an acoustic signal
sounds and the empty cooking zones are
deactivated. Touch to resume this
function. You can move the pot or place
it in a new position.
To modify the default heat setting
manually touch the control bar and
choose the appropriate level.
ENGLISH 13