User manual

Operating the fan speed
manually
You can also operate the fan from the
hob manually.
Touch when the hob is active.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually.
When you press
, you raise the fan
speed by one. When you reach an
intensive level and press again, you
set the fan speed to 0 which deactivates
the hood fan. To start the fan again with
the fan speed 1 touch .
To activate an automatic
operation of the function,
deactivate the hob and
activate it again.
5.13 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob first.
1. Touch for 3 seconds to activate
the function.
The display comes on and goes out.
2. Touch for 3 seconds.
or comes on.
3. Touch of the timer to choose one
of the following:
• - the sounds are off
• - the sounds are on
4. Wait until the hob deactivates
automatically to confirm your
selection.
When the function is set to you can
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
5.14 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3680 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
• The function decreases the power of
the other cooking zones connected to
the same phase.
• For cooking zones that have a
reduced power, the control panel
shows the maximum possible heat
settings.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
• The activation of the function depends
on the number and size of pots.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
ENGLISH 15