User manual

Problem Possible cause Remedy
The diameter of the bottom
of the cookware is too
small for the zone.
Use cookware with correct
dimensions. Refer to
"Technical data".
PowerSlide operates. Two
pots are placed on the flex‐
ible induction cooking
area.
Use only one pot. Refer to
"Flexible induction cooking
area".
and a number come on.
There is an error in the
hob.
Deactivate the hob and ac‐
tivate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from
the electrical supply. After
30 seconds, connect the
hob again. If the problem
continues, speak to an Au‐
thorised Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model GK906TSILO PNC 949 596 923 00
Typ 61 E6A 04 AA 400 V 3N 50 - 60 Hz
Induction 11.0 kW Made in Germany
Ser.Nr. ................. 11.0 kW
ELECTROLUX
www.electrolux.com20