User manual

Problem Possible cause Solution
The temperature in the
freezer is too high.
Products are too near to each
other.
Store products so that there is
cold air circulation.
There is too much frost. Food is not wrapped correctly. Wrap the food correctly.
The door is not closed correctly. Refer to "Closing the door".
The temperature regulator is not
set correctly.
Set a higher temperature.
DEMO appears on the
display
The appliance is in demonstra-
tion mode. (dEMo)
Keep the OK button pressed for
approximately 10 second until a
long sound of buzzer is heard and
the display shuts off for a short
time; the appliance starts working
regularly
Warning signal
The warning signals of the control and sig-
nalling system of the appliance are dis-
played on the Visual Display.
The system will give out a signal if:
• An error has occurred in the operation of
the appliance. In case the electronic sys-
tem of the appliance cannot identify the
real temperature a sign will appear on the
temperature display.
• Until the staff of the customer service ar-
rive at the spot and solve the problem,
the appliance will continue operating with
the help of a spare program.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the light-
ing device. Contact your Service Center
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
electrolux 49