User manual

32
Fasten the appliance in the recess
- with the attachment profile at the
top A1,
- with the hinges at the side A2,
- with the attachment element at the
bottom A3.
Changing the compartment door
• At hinge 1 fold away the cover.
• Unscrew hinge
1 and remove the compartment door with the
hinge.
• Unscrew the closure
2.
• Close the holes with the plugs
3.
• Rotate the door and closure by 180° and replace on the other
side: Insert the compartment door at the top, put the hinge
1
in place at the bottom, screw down again and close the cover.
Fastening in the recess
1. Lift off covers 3.
2. Loosen attachment screws
1 on the appliance.
3. Remove the door.
4. Replace all attachment screws
1 on the other side and screw
in a little way.
5. Unscrew door attachment screws
2 and transfer the hinges
to the diagonally opposite corner.
6. Suspend the appliance door on the
screws
1inserted previously and tighten
the screws.
7. Cover all open attachment holes with
covers
3.
Installing in a kitchen unit
• Slide the attachment element
into the rail underneath the
appliance on the handle side
on the left or right, depending
on which side the handle is.
Screw into place with screw
3.5 x 11.
• Slide the appliance into the
recess.
Changing over door hinges
Installation dimensions (mm)
A B C
IK 205 1270 1269 1260
IK 257 1524 1523 1514
Max. weight of unit
door = 17,5 kg