User manual

32
Fasten the appliance in the recess
- with the attachment profile at the
top A1,
- with the hinges at the side A2,
- with the attachment element at the
bottom A3.
Fastening in the recess
Installing in a kitchen unit
• Slide the attachment element
into the rail underneath the
appliance on the handle side
on the left or right, depending
on which side the handle is.
Screw into place with screw
3.5 x 11.
• Slide the appliance into the
recess.
7. Screw the towing bracket
bn on the unit door (screws
4 x 14).
• In the area of the unit door
handle a towing bracket
must be mounted.
• If required several brackets
can be mounted.
• To ensure t h e tow i n g brack-
et is in a suitable position
with the attachment brack-
et, the adjacent measures
must be used.
1. Lift the fitting aids out to the
top, turn round and insert
into the adjacent openings.
2. Slide the fitting aids
4 up
level with the unit door:
underside of stop edge of
fitting aid = upper edge of
unit door.
3. Unscrew the
counternuts
3.
Fitting a unit door
4. Suspend the attachment strut
1 on the unit door.
5. Fasten the attachment strut
1.
6. Lift the fitting aids
4 out to the
top, turn round and insert into
the adjacent openings.