User manual

40
Fresh food refrigeration
To obtain the best performance:
do not store warm food or evaporating liquids in
the refrigerator;
do cover or wrap the food, particularly if it has a
strong flavour.
Position food so that air can circulate freely round
it.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
For better use of space, the front half-shelves can lie
over the rear ones.
D338
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be placed at different heights.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes free, then reposition as required.
Important
If the door remains ajar for more than 7 minutes,
the internal lighting will turn off electronically;
after this, the lighting function will be reset by
opening and closing the door itself.
Operation
Insert the plug in the power socket.
Press (I) for the functioning of the whole
appliance .
Press (B) can function the fridge compartment
separately but only with the appliance in
function.
The fridge is pre-set to run at +5°C. This
temperature will be reached in a few hours.
As soon as the appliance is switched on the
temperature indicator (D) shows the current
temperaure inside the fridge.
G. Action Cool button
The maximum performance is obtained by setting
the supercooling function. It’s recommended when
loading large quantities of food.
Press the Action Cool button (G).The relevant pilot
light (F) switches on.
The internal temperature goes down to +2°C.
After about 6 hours the supercooling function
switches off automatically.