User Manual

6
www.electrolux.com
4. CONTROLS
ABCD EF GH
IL
Button Function Display
A Brief pressure: Activates/Deactivates the button pad
functions. All the buttons light up white.
If the motor is ON, it turns the motor off and leaves the
button pad functions active.
If the motor is OFF, the button pad remains active for
1 minute.
-
Pressed for 3 Seconds (Motor = Off): Activates/Deactivates
the button pad lock. For example to allow cleaning of the
Glass without activating any functions.
Active: All the buttons ash.
Inactive: Buttons remain lit for 1
minute.
B Activates speed one. The button turns from white to red.
C Activates speed two. The button turns from white to red.
D Activates speed three. The button turns from white to red.
E Activates Intensive 1 speed for 10 minutes. At the end
of this time the system will automatically return to the
speed set before. It is disabled by changing speed or
pressing button A.
The button turns from white to red.
Press and hold for approximately 3 seconds to Enable /
Disable the Activated Charcoal Filter alarm (Motor = Off).
H ashes 5 times.
F Activates Intensive 2 speed for 5 minutes. At the end
of this time the system will automatically return to the
speed set before. It is disabled by changing speed or
pressing button A.
The button turns from white to red.
G Activates BREEZE speed for 60 minutes. At the end of
this time the motor switches off. It is disabled by changing
speed or pressing button A.
The button turns from white to red.
H Filter alarm button.
This button is normal off. It is only displayed when the
lter alarm is triggered. The alarm can be reset by press-
ing and holding this button for approximately 3 seconds
(Motor = Off).
Button H xed (30 seconds): indicates
the need to wash the metal grease
lters. The alarm is triggered after
the Hood has been in operation for
40 working hours.
Button H ashing (30 seconds): indi-
cates the need to change the activated
charcoal lters, and also to wash
the metal grease lters. The alarm
is triggered after the Hood has been
in operation for 160 working hours.
I H2H indicator button.
This button is normally off. It is only displayed when the
hob is connected to the Hood.
The button turns red.
L Press briey: Turns the lighting system on and off at
maximum intensity.
-
Press and hold to change the lighting intensity up or down. -