EBC65 KBC65 EN Automatic coffee maker User manual Get the most out of your appliance For quick access to manuals, how-to guides, support and more through our photo registration visit electrolux.
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. SAFETY INFORMATION................................................................................................. 3 SAFETY INSTRUCTIONS.............................................................................................. 3 PRODUCT DESCRIPTION............................................................................................. 6 PRELIMINARY CHECKS.................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com Cleaning and user maintenance shall not be made by children without supervision. Never immerse the appliance in water. CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent This is an household appliance only.
ENGLISH 2. SAFETY INSTRUCTIONS DANGER! This is an electrical appliance, it is therefore important to respect the following safety warnings: • Never touch the appliance with damp hands. • Never touch the plug with damp hands. • Make sure the socket used is freely accessible at all times, enabling the appliance to be unplugged when necessary. • Unplug directly from the plug only. • Never pull the power cable as you could damage it.
www.electrolux.com If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional. To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm must be installed. Do not use multiple sockets or extensions. IMPORTANT! Safety cutout devices must be included in the mains power supply in compliance with the installation regulations in the country concerned. 3.
ENGLISH 7 4. PRELIMINARY CHECKS 4.1 Controls after transport After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.Do not use the appliance if it is visibly damaged. Contact Customer Services. 4.2 Installing the appliance IMPORTANT! • Installation must be performed by a qualified professional in compliance with legislation in force in the country of installation (see Built-in installation).
www.electrolux.com 6. TURNING ON AND HEATING UP Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle. DANGER OF BURNS! During rinsing, a little hot water flows from the coffee spouts. To turn the appliance on, press the ON/ stand-by button (A7) (fig. 7). The message “HEATING UP... PLEASE WAIT” is displayed.
ENGLISH If it is removed, it will not be possible to make the coffee and the appliance will display “GROUND TOO FINE ADJUST MILL AND PRESS OK” and then “FILL TANK”. After about 14 single (or 7 double) coffees, the appliance displays “EMPTY WASTE COFFEE CONTAINER”. The appliance provides a frequent empty waste coffee container message. Even if not full, the empty waste coffee container message is displayed 72 hours after the first coffee has been delivered.
www.electrolux.com change the quantity of coffee. The progress bar shows the quantity of coffee selected. • Press the OK icon (B9) again to confirm (or the icon (B6) to cancel the operation). • Press the icon (B6) twice to exit the menu. The appliance is now reprogrammed with the new settings and is ready. 9. ADJUSTING THE COFFEE MILL The coffee mill is preset in the factory and should not require adjusting.
ENGLISH 11 11. DELIVERING HOT WATER • Always make sure the appliance is ready. • Make sure the hot water spout is in place (fig. 21); position a container under the spout (fig. 22). • Press the icon (B13) (fig. 23) and hot water flows out of the hot water spout into the container. You should not deliver hot water for more than 2 minutes at a time. To interrupt, press the icon (B13) or the icon (B6). The appliance stops delivery once the set quantity is reached. 12.
www.electrolux.com • Remove the hot water spout and attach the milk container to the nozzle (fig. 17). • Position the milk spout as shown in fig. 18 and then place a sufficiently large cup under the coffee and milk spouts. • Press the icon (B12) (fig. 19). “CAPPUCCINO...” is displayed and after a few seconds, frothed milk flows out of the milk spout into the cup below. (Delivery stops automatically). • The appliance delivers coffee. • The cappuccino is now ready.
ENGLISH • Press the OK icon (B9) to confirm then the icons (B7 and (B8) (fig. 2) until “COFFEE FOR CAPPUCC.” is displayed. • Press the OK icon (B9) again. • Select the quantity of coffee required by pressing the icons (B7) and (B8). The progress bar shows the 13 quantity of coffee selected. • Press the OK icon (B9) to confirm or the icon (B6) to cancel the operation. • Press the icon (B6) twice to exit the menu. 15.
www.electrolux.com 16. CHANGING JUG FUNCTION PARAMETERS The jug programme is factory set with default values. These can be modified to suit your personal taste and saved. You can select 5 different types of coffee from extra-mild to extra-strong and, with the aid of a graphic bar, 10 quantities of coffee. To make these adjustments, proceed as follows: • Press the icon (B2) to enter the menu. Press the icons (B7) and (B8) until “PROGRAM JUG” is displayed.
ENGLISH contains. Before the indicator protrudes from the cup tray, the drip tray must be emptied and cleaned. To remove the tray: 1. Open the service door (fig. 26). 2. Remove the drip tray and the waste coffee container (fig. 27). 3. Clean the drip tray (fig. 29) and waste coffee container (A4). 4. Replace the drip tray and waste coffee container (A4). 5. Close the service door. 17.4 Cleaning the water tank 1.
www.electrolux.com Support pare milk as described in Note 3 in the section “Making cappuccino”. All components can be washed in a dishwasher, placing them in the top basket of the dishwasher. 1. Turn the lid of the milk container clockwise then remove it. 2. Remove the milk spout and intake tube. Pin If the brewing unit is difficult to insert, you must first adapt it to the right dimensions by pressing it forcefully from the bottom and top as shown in the figure.
ENGLISH 17 18.
www.electrolux.com (B9) to confirm. • Use the icons (B7) and (B8) to set the minutes, then press the OK icon (B9) to confirm. • Press the icon (B6) to exit the menu. 18.5 Setting auto-start time This function programmes the time the machine will come on automatically. • Make sure the clock on the appliance has been set. • Press the icon (B2) to enter the menu and then the icons (B7) and (B8) until “START TIME” is displayed. • Press the OK icon (B9).
ENGLISH FOR CAPPUCCINO”. 18.10 Programming the jug For instructions on programming the jug, see the section “ CHANGING JUG FUNCTION PARAMETERS”. 18.11 Programming water For instructions, see the “CHANGING THE QUANTITY OF HOT WATER” section. 18.12 Descaling IMPORTANT! Descaler contains acids. Respect the safety warnings provided by the manufacturer and given on the descaler pack. Use the descaler recommended by the manufacturer only. (cod. 9029798718 M3BICD200 - WebShop Electrolux: www.electrolux.
www.electrolux.com 18.13 Resetting default values (reset) If you change the original values, the default values can be reset as follows: • Press the icon (B2) to enter the menu and then the icons (B7) and (B8) until “RESET TO DEFAULT” is displayed. • Press the OK icon (B9) and the appliance displays “RESET TO DEFAULT PLEASE CONFIRM”. • press the OK icon (B9) to reset the default values; 18.14 Statistics This displays statistics relating to the machine.
ENGLISH 21 19. TURNING THE APPLIANCE OFF Each time the appliance is turned off, it performs an automatic rinse cycle which cannot be interrupted. DANGER OF BURNS! During rinsing, a little hot water flows from the coffee spouts. Avoid contact with splashes of water. To turn the appliance off, press the ON/ stand-by button (A7). The appliance performs the rinse cycle then goes off. 20. TECHNICAL SPECIFICATION Voltage: 220-240 V~ 50-60 Hz max.
www.electrolux.com 21. DISPLAYED MESSAGES Possible cause Remedy FILL TANK! Displayed message The water tank is empty or positioned incorrectly. Fill the tank with water and/ or insert it correctly, pushing it as far as it will go. GROUND TOO FINE ADJUST MILL AND (alternating with) PRESS OK The grinding is too fine and the coffee is delivered too slowly. Turn the grinding adjustment knob by one notch toward number 7, then run a rinse cycle.
ENGLISH Displayed message Possible cause 23 Remedy FILL BEAN CONTAINER The coffee beans have run out. Fill bean container INSERT BREWING UNIT The brewing unit has not been replaced after cleaning. Insert the brewing unit as described in the section “Cleaning the brewing unit”. CLOSE DOOR The service door is open Close the service door. GENERAL ALARM! The inside of the appliance is very dirty.
www.electrolux.com Problem Possible cause Remedy The coffee is delivered too quickly. The coffee is ground too coarsely. Turn the grinding adjustment knob one click anticlockwise towards “1” while the coffee mill is in operation. Avoid turning the grinding adjustment knob excessively otherwise when you select 2 cups, the coffee may be delivered a drop at a time. The effect is only visible after delivering two coffees. Coffee does not come out of one of the spouts. The spouts are blocked.
ENGLISH 25
www.electrolux.
ENGLISH 27
5713240351_02_0619 electrolux.
