Multi-Steamer Household Type Steam Cleaner Owner’s Guide Z370 Series IMPORTANT For Service, Spares or any advise in the UK, please contact your Customer Care line agent at 08706 055 055. For Service, Spares or any advise in other locations, please refer to your local telephone directory for your nearest Electrolux Service Agent. INDEX Important Safeguards ................... 2 Service Information ...................... 4 Use & Assembly........................ 5-8 Maintaining .............................
IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER. WARNING To reduce the risk of fire, electric shock, or injury: • Do not leave steam cleaner when plugged in. Unplug the electrical cord when not in use and before servicing. • Do not allow to be used as a toy. Close attention is necessary when used near children, pets and plants. • Use only as described in this manual.
BEFORE YOU START CHECK THE VOLTAGE First check the voltage shown on the data plate (see rear view) to make sure that the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer. CONNECTING TO YOUR ELECTRICITY SUPPLY (For UK residents only) Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.
SERVICE Should you require service on your Electrolux cleaner, please telephone 08706 055055 if you reside in the UK, otherwise contact your nearest Service Agent. Important - in the event of the mains supply cable of this steam cleaner requiring replacement, we recommend that this be carried out by a Electrolux Service Agent. Spares New cloths can be obtained from Authorised Electrolux Dealers and electrical retailers.
Description of the Multi-Steamer Steam Cleaner 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Handle Safety filler cap Steam ready amber indicator light Power on green indicator light On (I) Off (O) Switch Cleaner body Floor cloth Floor brush Elbow Accessory connector for use with wand Extension wands Round brush (1 brass, 1 plastic) 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.
INSTRUCTIONS FOR USE The Electrolux Multi-Steamer steam cleaner is designed to thoroughly clean hard surfaces and upholstery that will withstand high heat. Do not use on soft plastics, unsealed wood, and cold glass. Check with the manufacturer of all upholstery types that the fabric can be steam cleaned. Particular care should be taken with velour and draylon fabrics. WARNING: On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action.
HOW TO ASSEMBLE AND USE (continued) 6. The round brush and curved nozzle can be fitted to the straight nozzle or the spray nozzle connection. Curved Nozzle Round Brush (1 brass, 1 plastic) Attachments 7. Fabric brush and window squeegee. The fabric brush can be attached to spray nozzle. The brush can be fitted with the window squeegee. Insert window squeegee side hooks into brush tabs and join the two parts together.
9. Floor Brush. This accessory is used with wands, and is provided with a floor cloth. To attach the cloth, rest the brush on the center of cloth and then pull the cloth edges one by one under retaining springs as shown below. The slide indicator may be used to retract the center of the floor brush to expose the bristles. In this position the floor brush may be used to clean abrasive surfaces, such as garage floors, basement floors and sidewalks.
Caution! Spray nozzle may be hot Steam delivey symbol FILLING THE BOILER TANK DURING USE 12. When the water runs out, steam is no longer supplied when steam delivery button is pressed. To fill up boiler tank, follow these steps: a. b. c. d. e. f. g. h. i. Turn off the cleaner by pressing on/off button. Unplug the cleaner from electrical outlet. Press steam delivery button until all pressure has been released. Wait for about 3 minutes before carefully unscrewing the safety cap.
PROBLEM SOLVING NOTE: Unplug the electrical cord before servicing. PROBLEM Appliance won’t start. CAUSE ✓ Electric plug. SOLUTION Push plug securely into outlet. V erify power on light is on. Try another outlet. Check circuit breaker. Appliance spits water out of nozzle. ✓ Too much water in tank. Do not ✓ Water condensed in wand and the hose. Water boils out of fill spout when adding water. Check the water level in the tank. overfill.
Guarantee (for UK residents only) This guarantee is in addition to your statutory and other legal rights. This product is for household use only. Electrolux products are carefully designed, manufactured, tested and inspected and, in consequence, we undertake to replace or repair any part found to be defective in material or workmanship, within one year of delivery to the original purchaser, free of charge.
Cod.5095100400 Rev. 2 del 24/10/01 Part No.