User manual

www.electrolux.com
7
ENGLISH
Thank you for choosing an Electrolux air purier.
Always use original accessories and spare parts to
get the best results. This product is designed with the
environment in mind. All plastic parts are marked for
recycling purposes.
BEFORE STARTING
• Read this manual carefully.
• Check that all parts described are included.
• Pay special attention to the safety precautions!
Picture pages 2-4
Place the product according to the instructions
below for optimal operation and results:
BEFORE FIRST USE
Operate the air cleaner in an enclosed area.
Close all doors, windows, and other openings
connecting to the outside of the room.
Place the air cleaner in a location that does
not restrict the airow through the top of the
appliance.
The appliance must be placed on a leveled oor
that can support it.
There should be a minimum of 30 cm of clearance
around the appliance.
Remove the plastic protective bag from the
multi-layer lter:
1
2
3
4
OPERATION INSTRUCTIONS
TO TURN ON THE APPLIANCE
Pull the Fabric handle outward to remove the air
intake door.
Take out the multi-layer lter pulling it out by the
handle.
Remove the plastic protective bag from the multi-
layer lter.
Reinstall the multi-layer lter into the appliance.
Plug in the appliance and tap (touch and release)
the "
" button to turn it on.
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality, during this time the
Loading LED and the Air quality light will pulsate
slowly in white. Each time the appliance is turned
on the SMART mode is activated automatically
and the fan runs in low speed until the air quality
analysis is complete.
5
6
7
8
9
SMART MODE
About the Air quality light
CHILD LOCK FUNCTION
FILTER CHANGE INDICATOR
MANUAL MODE
WIFI FUNCTION
The appliance has an air quality sensor that
analyzes the air quality.
The air quality light will show the real-time air
quality through dierent colors of light. As shown
below:
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality each time the appliance
is turned on. During this time, the air quality light
will pulsate slowly in white.
Very high humidity conditions in the room might
produce condensation in the sensors. This could
aect the accuracy of the sensor readings.
In this mode, the appliance will choose the fan
speed automatically, based on the air quality level.
This is the default mode each time the appliance
is turned on.
NOTE: In "SMART" mode the fan speed cannot be
The Child lock can be activated and deactivated
by long pressing the On/O and the Mode button
simultaneously for 4 seconds. This function can
also be activated or deactivated via the PURE A9
app. When the Child lock is activated, the control
panel of the appliance cannot be interacted with
and the Child lock indicator light up.
The lter change indicator will light up to remind
you to change the lter. Refer to the instructions
in the Pure A9 app or the Electrolux website on
where to purchase replacement lters. Ensure
the plastic protective bag is removed from the
replacement lter before use. After the lter is
replaced, the lter change indicator will turn o
automatically.
NOTE: The multi-layer lter cannot be washed, it
can only be replaced.
Tap the “MODE” button to switch the appliance to
“MANUAL” mode. In this mode, the fan speed can be
changed manually by touching the Fan speed slider.
NOTE: The fan speed will change gradually after a
new fan speed is selected.
This appliance is equipped with a WiFi module,
which enables remote control and access to the
full functionality of the system via our smartphone
app. Download our Pure A9 app and follow the
instructions for how to connect it with your
appliance. When the connection is stablished, the
WiFi indicator will light up.
10
11
14
15
12
13
LIGHT'S COLOR
Blue
Green
Orange
Red
PM 2.5 (μg/m
3
) AIR QUALITY
0-15 Good
16-35 Average
36-75 Poor
Above 75 Very Poor
changed manually.
EN
CS
CT
KR
TH