INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS ISTRUZIONI DI INSTALLAZIONE, FUNZIONAMENTO E MANUTENZIONE INSTRUCTIONS D'INSTALLATION, D'UTILISATION ET DE MAINTENANCE INSTRUCCIONES DE INSTALACIÓN, USO Y MANTENIMIENTO "PROSTORE SMART" VERTICAL REFRIGERATORS FRIGORIFERI VERTICALI "PROSTORE SMART" RÉFRIGÉRATEURS VERTICAUX "PROSTORE SMART" FRIGORÍFICOS VERTICALES "PROSTORE SMART" USA IT FR ES Page Pagina Page Página 07 20 33 46 -19 - 32 - 45 - 58 PART NO. 5957 410 01 VERSION 2 2005.
INSTALLATION DIAGRAM SCHEMA DI INSTALLAZIONE SCHÉMA D'INSTALLATION DIAGRAMA DE INSTALACIÓN 105.
CONTROL PANEL PANNELLO COMANDI PANNEAU DE COMMANDE PANEL DE CONTROL 1 2a 3a 4 7 8 MANUAL DEFROST 9 COMPRESSOR STATUS POWER SUPPLY STATUS 1 2 3 CATEGORY 4 ACCESS TO FOOD CATEGORIES % SET HACCP HUM HIGH HIGH HUM.
REVERSING OPENING OF THE DOOR INVERSIONE APERTURA DELLE PORTE INVERSION DU SENS D'OUVERTURE DE LA PORTE CAMBIO DE DIRECCIÓN DE APERTURA DE LA PUERTA E F (Dett.1) G H (Dett.
LEVELLING THE APPLIANCE LIVELLAMENTO DELL'APPARECCHIATURA MISE À NIVEAU DE L'APPAREIL NIVELADO DEL APARATO +30 mm -10 mm 5
PRODUCT LOADING DIAGRAM SCHEMA DI RIEMPIMENTO DEL FRIGORIFERO DIAGRAMME DE CHARGEMENT DU PRODUIT DIAGRAMA DE CARGA DE PRODUCTO 6
USA TABLE OF CONTENTS SAFETY INSTRUCTIONS ......................................................... Page 9 A.1 GENERAL INFORMATION........................................................ Page 10 A.1.1 Foreword ..................................................................................................................... Page 10 A.1.2 Intended use and limitations ...................................................................................... Page 10 A.1.3 Testing .........................
C.1.7.1 General description ..................................................................................................... Page 15 C.1.7.2 HACCP ........................................................................................................................ Page 15 C.1.7.3 Service alarms ............................................................................................................ Page 16 C.1.7.4 Service alarms list ...............................................................
SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your appliance, please follow these basic precautions including the following: • Read all instructions before using your appliance. • This Manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating and maintaining this appliance.
A.1.7 PHYSICAL SAFETY FEATURES, HAZARDS The appliance has no sharp or projecting parts. DANGER! DO NOT REMOVE. There are guards on the units to prevent access to components which require air movement. A.1 GENERAL INFORMATION A.1.1 FOREWORD The purpose of this manual is to provide the necessary information for the correct installation, operation, use and maintenance of the appliance.
B.1 INSTALLATION pressed board: protective surround elements WEAR PROTECTIVE GLOVES WHEN UNPACKING AND INSTALLING THE APPLIANCE. B.2.1 POSITIONING Install the equipment, taking all the safety precautions required for this type of operation, also respecting the relevant fire-prevention instructions. Place the appliance in a ventilated room and away from heat sources such as radiators or airconditioning systems, in order to allow the cooling of the refrigerating unit components.
53/64" 21 mm K B.2.3 REVERSING OPENING OF THE DOOR These cabinets are normally supplied with opening to the right.
the Unit of Measure Indicator light starts flashing. C.1 OPERATIONS and USER INSTRUCTIONS - To change the SET temperature, press SET/DOWN button or MANUAL DEFROST/UP button within 15 seconds C.1.1 CONTROL PANEL 2a 3a 4 1 7 8 MANUAL DEFROST 9 COMPRESSOR STATUS SET POWER SUPPLY STATUS 1 2 3 CATEGORY 4 ACCESS TO FOOD CATEGORIES % SET HACCP HUM HIGH HIGH HUM.
if “NONE” is displayed, this means that the function is disabled. To select the category, press MANUAL DEFROST/UP or SET/ DOWN button - press SET/DOWN button or MANUAL DEFROST/UP button temperature SET or or SET - To store the new set value, wait until it stops flashing to exit the program once selected, if a selection is not made after 5 seconds, the last category displayed will be confirmed automatically and stored. SET C.1.
you get information on maximum temperature, time and date (day, month and year) alarm occured. There is a sticker inside the chamber indicating the maximum level of loading: There are two possible situations: a) the alarm is running b) the alarm has occured a) the alarm is running Cover or wrap food before placing it in the refrigerator and avoid putting hot foods or steaming liquids inside. Do not leave the door open longer than necessary when putting in or taking out products.
· HOW LONG ARE THE ALARMS RECORDED? Until you have seen the complete alarms list recorded. After that, they will remain stored ‘till a new alarm occurs: the reset will be automatic. starting and ending time and date of the alarm are shown by a rolling label: “TEMP 78.8F/26C Start 17.05 10-10-99 End----”.
C.1.7.5 ALARM MANAGING · Whenever a high chamber temperature alarm occurs the display shows the label “TEMP” and the buzzer is active. D.1 ROUTINE MAINTENANCE Routine maintenance tasks can be performed by non-specialised personnel. When performing maintenance please follow the instructions closely, keeping safe at all times. The manufacturer declines any responsibility for injury sustained from unsafe acts. HACCP · To reset the buzzer press the button for 1 second.
D.3 TROUBLESHOOTING D.2 MAINTENANCE TO BE PERFORMED BY TRAINED PERSONNEL ONLY D.3.1 QUICK TROUBLESHOOTING GUIDE In some cases faults can be remedied easily and quickly. Below there is a list of possible faults and remedies: Non-routine maintenance tasks must be performed by an AUTHORIZED SERVICE AGENT. A. The appliance doesn’t switch on: - check that the power plug is properly inserted into the socket. - check that the mains socket is powered. B.
D.4 WASTE DISPOSAL AND DEMOLITION D.4.1 WASTE STORAGE At the end of the appliance’s working life, make sure it is disposed of properly. Make sure you remove the doors before scrapping the appliance. Special waste materials can be stored temporarily while awaiting processing for disposal and/or permanent disposal. In any event, the binding environmental protection laws in the country of use must be observed. D.4.
