Quick Start Manual

13
Measure from the bottom of the air deector to
the bottom of the hood outlet, as shown.
Cut the duct at the measured size.
Uninstall the air deector removing the 4
assembly screws.
Slip the duct onto the bottom of the deector.
Place the assembled deector and duct over the
exhaust outlet from the hood. Assemble the air
deector with the duct cover bracket with 4
assembly screws provided as shown.
Use duct tape to seal the deector and at the
exhaust outlet from the hood.
•
•
•
•
•
•
Connecting the ductwork
Install ductwork, making connections in the
direction of airow as illustrated.
Push duct over the exhaust outlet.
Wrap all duct joints and the ange connections
with duct tape for an airtight seal.
Make the same connection in the wall or ceiling
vent exit.
Air deect installation
(Recirculating accessories)
Assemble the air deector with the duct cover
bracket with 4 assembly screws provided as
shown.
•
•
•
•
•
Installing the hood
Ductwork
Hood
Duct tape
over seams