Operating and Installation Instructions Freezer SANTO 3244-4 i

6
Remove transport packaging
The appliance and the interior fittings are protected for transport.
• Remove all adhesive tape and packing pieces from the interior of the
appliance.
You can remove any remnants of adhesive using white spirit.
Warning! Before disposing of old appliances make them inoperable.
Remove plug from mains, sever the power cable, remove or destroy any
snap or latch closures, to prevent small children being trapped inside.
• Use an authorised disposal site.
Contact your Local Council or Enviromental Health Office to see if the-
re are facilities in your area to recycle the appliance.
23
Place guide (A) on the inside part
of the furniture door, in the upper
and lower positions as shown in
the figure and mark the position of
external holes. After having drilled
holes, fix the guide with the
screws supplied.
20 mm
A
50mm
PR166
PR33
C
A
Fix cover (C) on guide (A) until it
clips into place.
Open the appliance door and the
furniture door at 90°. Insert the
small square (B) into guide (A).
Put together the appliance door
and the furniture door and mark
the holes as indicated in the figu-
re. Remove the squares and drill
holes with ø 2 mm at 8 mm from
the outer edge of the door. Place
the small square on the guide
again and fix it with the screws
supplied.
8mm
PR167
A
B