User manual

58
Electrolux 818 37 21-01/1
Installation
GB
Mains Cable
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of
its niche.
· Damage to the cord may cause a short-circuit, fire and/or electric s hock.
· In the event of damage to the appliance's main cable, only an authorised service company recommended by
the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Unpacking
Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Remove the transport supports
Remove the tape and the transport supports from
· the door sides
· inside the door hinges
· the shelves
Remove the t ransport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops. Take hold of t he rear edge of the
glass shelf and pull the shelf and transport support
forward until the shelf tilts and the transport support
can be removed. Some models are fitted with a
silencing pad under the cabinet. Do not remove this
pad.
Cleaning
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
Installing the cabin et
When two appliances are placed beside each other ,
the distances enclosed in the plastic wrapping should
be glued between the appliances. As shown in the
illustration.
Make sure that the power plug is not squashed or
damaged by back of the product.
· A damaged power plug may overheat and cause a
fire.
Do not place heavy articles or the product itself on
the power cord.
· there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the
power plug.
· there is a risk of electric shock or fire.