User manual

Problem Possible cause Solution
The door is not closed
correctly.
Refer to "Door open alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
“dEMo” appears on
the display.
The appliance is in dem-
onstration mode.
Keep pressed approximate-
ly 10 sec the OK button
since a long sound of buz-
zer is heard and the display
shut off for a short while:
appliance start works regu-
larly.
The compressor
runs continuously.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The room temperature is
too high.
Decrease the room temper-
ature.
There is too much
frost and ice.
The door is not closed
correctly.
Refer to "Closing the door".
The door gasket is de-
formed or dirty.
Refer to "Closing the door".
The temperature in
the appliance is too
cold.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The temperature in
the appliance is too
warm.
The Temperature regulator
may be set incorrectly.
Set a colder temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The temperature in
the freezer is too
warm.
Food is too near to each
other.
Store food so that there is
cold air circulation.
64
www.electrolux.com