User manual

82
To change the lamp
The light is switched on automatically
when the door is opened. Before
replacing the light bulb, disconnect the
power plug from the outlet.
Press the spring together and pull the
grille downward at the same time.
Use a bulb of the same type, E14
socket, maximum rating of 25 W.
When the appliance is not in u se
Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
SOMETHING NOT WORKING
Before contacting your local Service Force C en tre check the following point:
Problem Possible cause / Remedy
"" is displayed in the
temperature display.
An error h as occurred in measuring the
temperature. C all your service representative.
(The cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
Audible alarm + flashing red
warning lamp. (It is too warm
inside the freezer.)
Switch of f the audible alarm by pressing the
alarm off button.
The audible alarm could have been triggered
by:
The cabinet having been recently switched
on and the temperature still being too h i gh.
See the chapter " Switching on and setting
the temperature".
The door may have been open for so long
that the `door open' alarm was triggered.