User manual

85
INSTALLATION
Mains Cable
Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circu it, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manu facturer or
a similarly qualified person may adjust
it in order to avoid shock hazard for the
user.
Unpacking
Unpack the cabinet and check that it
is in good condition and fr ee of any
transport damage. Notify the dealer
immediately of any damage. Hand the
packaging over for recyclin g. F or more
information, contact your local city
office or the dealer.
Do n ot allow children to play with the
packaging. The plastic film can cause
suffocation.
Electrical connection
Connect the cabinet to a grou n ded
electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left
inside the cabinet.
Remove the transport supports
Remove the transport supports placed
along the door sides.
Some models are fitted with a silencing
pad u nder the cabinet. Do not remove
this pad.
Installation of distance
Assemble the attached distance on
the back side of the panel according to
the illu stration.
Cleaning
Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergentandasoftcloth.
Installing the cabinet
When two appliances are placed
beside each other, the spacers
enclosed in the plastic wrapping
should be glued between the
appliances. As shown in the
illustration .