User manual

87
Door Reversal
1. Close the cabinet and remove the
plug from the electrical socket.
2. Remove the ventilation grille. There
is a part on the grille that can be
removed. Remove and reposition it on
the other side.
3. Put the cabinet on a wooden board
when it is laid down. Later, when
raising the cabinet, it will be easier to
grip under the cabinet thanks to the
boar d.
1
2
3
4. On the u pper part of the cabinet.
Put the hinge pin on the other side.
5. On the lower part of the cabinet.
a. Unscrew the hinge.
b. Remove the door-closing fittings
from the hinge and put the hinge pin
on the other side. Then attach the
supplied door-closing fitting.
4
5a
5b
6. a. Remove the door-closing fitting
from the bottom of the door.
b. Then secure the supplied
door-closing fitting on the other side.
c. Secure the l ower h in ge.
Removeanyplayinthedoorby
adjusting the height of the lower hinge
with the supplied spanner. Secure with
the lock-nut.
a
b
c
6
7. Raise the cabinet and replace the
ventilation grille.
8. To transfer the handle.
Unscr ew the screws. Fit the handle
onto the opposite side by turning it
one half circle. Press the supplied
plastic plugs into the holes to which
the handle was previously fitted.
8
9. Put the cabinet in position. Check
that the appliance is level. See the
section "Position in g the cabinet".