Installation manual

26
Installation
Steam-heated dryer
Mountingsteamcalorierondryer
Dryer type 4250:
Thesteamcalorierisonthepallet.
Dryer type 4350:
Thesteamcalorierisinthedrum.
1. Unpackthecalorier.
2. Demount top back plate on the dryer.
3. Demount supporting rail on the dryer, see ar-
row (note which way the supporting rail turns
as it has to be remounted the same way, see
step 5).
4. Hangthecalorieronthebottomsupporting
rail on the dryer.
5. Holdthecaloriertowardsthedryerand
remount the supporting rail as before making
surethatitgraspsthecalorier.
6. Screw the screws into the supporting rail.
During the tightening process it is important to
keepthedryerandthecaloriertogether.
Note!Aftermountingthecaloriertheremust
be no space between the dryer and the calo-
rier.
7. Mount back plate.
8. Attatch the pressure hoses to the dryer’s inlet
and outlet connecting branches.
It is important to support the inlet and the
outlet connecting brances in order to prevent
deformation.
The pressure hoses must not hang down.
W00067
15
15
16
W00068
16