PLEASE HELP IF THIS APPLIANCE IS REPLACING AN OLD REFRIGERATOR OR FREEZER WHICH IS GOING TO BE SCRAPPED, WE ASK YOUR ASSISTANCE IN PREVENTING CHILDREN FROM BECOMING TRAPPED INSIDE THE OLD MODEL BY ENSURING THAT ITS DOOR OR LID IS REMOVED BEFORE DISPOSAL. INSTALLATION After unpacking your freezer, the interior, shelves, etc., should be washed as described after under “Cleaning”.
REGULATION OF TEMPERATURE % The temperature in the freezer will be influenced by such things as its faction, razor temperature, and the frequency and duration of door openings. These effects can be taken care of by changing the setting of the thermostat knob, With the thermostat set at No. &, suitable temperatures [—18°C or bestow] wilt be obtained for the storage of frozen food under rots conditions of use. In cold weather, the thermostat Fig. 1 knob can be turned back to No.
LOADING THE FREEZER After starting up the freezer for the first time, it is advisable 1o wait until the next day to ensure that it is working property before jading it with frozen food. See then that the thermostat is at the correct setting (normally No. B} and that the red indicator light is ‘ON’ showing that the correct storage temperatures has been reached. The freezer has a net storage volume of 302 liters (10.7 cubic feet) and will hold approximately 97 kg (215 b} of mixed varieties of food.
it possible, staring at the wWp, Move existing foods to one side, brush off the frost, therm move the foods back again to gain access to the remaining shelves in turn. Occasionally it is desirable to completely defrost the freezer and to clean it, choosing, if possible, a time when food stocks are low. Any remaining frozen food should be placed in cardboard boxes and wrapped in layers of newspaper, blankets ete.
object into the upper rectangular opening in the rear of the cover, and gently levering up the front right-hand corner of the cover to disengage it. Repeat at the lower corner, and take away the cover. Unscrew the bulb and resew in & new S.E.S. 10 or 15 watt bulb. Refit the damp cover, ensuring that it clicks firmly into place; reconnect to the electricity supply and switch on. Replacement of fight bulbs is not a free under-guarantee service.
Guarantee Electrolyte products are carefully designed, manufactured, tested and inspected and In consequence we can undertake to replace or repair any part found to be defective in material or workmanship, within ane year of delivery to the original purchaser, free of any charge. The guarantee is only conditional upon the appliance being correctly installed and used in accordance with the Company's instructions under normal conditions in European temperate climates.
