User manual

3
1
2
9. Remove the hinge. Put over the pin in
the direction of the arrow. Install the
hinge on the opposite side.
10. Tighten the hinge.
11. Put the top in position.
12. Push front the top.
13. Screw both screws on the rear side.
14. Remove and install the handle on the
opposite side.
1
2
3
WARNING!
Reposition, level the appliance,
wait for at least four hours and
then connect it to the power
socket.
Do a final check to make sure
that:
• All screws are tightened.
• The magnetic seal adheres
to the cabinet.
• The door opens and closes
correctly.
If the ambient temperature is
cold (i.e. in Winter), the gasket
may not fit perfectly to the
cabinet. In that case, wait for
the natural fitting of the gasket.
In case you do not want to
carry out the above mentioned
operations, contact the nearest
After Sales Service Force. The
After Sales Service specialist
will carry out the reversibility of
the doors at your cost.
www.electrolux.com14