User manual

Changing programme
To change a programme which has been selected by mistake once the programme
has started, first turn the programme selector to OFF (Aus) and then reset the
programme.
The programme can no longer be changed directly once the programme
has started. If nevertheless there is an attempt to change the programme
on the programme knob, the programme progress display and the main-
tenance indicators flash. If an option button (excluding the BUZZER (Sig-
nal) button) is pressed, Err appears in the multidisplay. The drying
programme is not however affected by this (laundry protection).
Putting in extra items or taking items out before end of programme
1. Open loading door.
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START PAUSE (Start/Pause) button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, display shows a blinking "0", anti-crease
icon appears on LCD. If the BUZZER (Signal) button has been pressed, an acous-
tic signal sounds intermittently for about one minute.
The drying cycles are automatically followed by an anti-crease phase which
lasts around 30 minutes. The drum rotates at intervals during this phase.
This keeps the laundry loose and free of creases. The laundry can be re-
moved at any time during the anti-crease phase. (The laundry should be
taken out towards the end of the anti-crease phase at the latest to prevent
creases from forming.) If LONG ANTI-CREASE
function has been se-
lected, the anti-crease phase is lengthened by 60 minutes.
daily use electrolux 23