User manual

Do not use standard bulbs! These develop too much heat and may damage
the machine!
Before replacing the bulb, disconnect the mains plug.
1. Unscrew cover above the bulb (this can be found directly behind the loading
aperture, at the top; refer to “Description of machine” section.)
2. Replace defective bulb.
3. Screw cover back down.
Check the correct positioning of o-ring gasket before screwing back the door light
cover. Do not operate the dryer when missing o-ring gasket on door light cover.
For safety reasons, the cover must be screwed down tightly. If this is not
done, the dryer must not be operated.
Machine settings
Setting Implementation
machine settings electrolux 33