User manual

12.

Change door lock F over to the opposite side, insert the cable connector and

screw down the door interlock.

13. On the other side, insert the cable connector in cover G, insert cover and allow

snap-in button to lock into place.

14. Insert loading door and hinges into recesses on the front of the machine and

screw down.

Note regarding contact protection:The machine is only secure for operations

again once all plastic parts have been inserted.

Special accessories

Intermediate installation kit for stacked washer and dryer:

Available from your Service Force Centre or your specialist dealer

These intermediate installation kits can be used to arrange the dryer and an

automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space-

saving washer/dryer stack. The automatic washing machine is at the bottom and

the dryer is at the top.

Version to be supplied:

– with extractable stacker plate 916.018 903

Read carefully the instructions supplied with the kit.

Installation kit for external condensate drain

Attached to your product

Installation kit 125 122 510 for direct draining of condensate into a basin, siphon,

gully, etc. The condensate tank then no longer has to be drained, it must however

remain in its intended position in the machine. Refer to the “Programme options”

section for how to deactivate the EMPTY WATER TANK

alert.

Max. displacement height: 1m from the base of the dryer; max. displacement length:

Read carefully the instructions supplied with the kit.

installation electrolux 41