User manual

4. If necessary clean the filter with the
brush under warm tap water and/or a
vacuum cleaner. Close the filter.
5. If necessary remove fluff from the filter
socket and gasket. You can use a
vacuum cleaner. Put the filter inside
the filter socket.
11.2 Draining the water
container
Drain the condensed water container after
each drying cycle.
If the condensed water container is full,
the programme breaks off automatically.
The indicator Water container
(Behälter) is on and you must drain the
water container.
To drain the water container:
1. Pull the water container and keep it in
horizontal position.
2. Move the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Move plastic connection in and install
water container.
4. To continue the programme press the
Start/Pause button.
11.3 Cleaning the heat
exchanger
If the indicator Heat exchanger
(Kondensator) flashes, do the inspection
of the heat exchanger and its
compartment. If there is a dirt, clean it.
www.electrolux.com18