User manual

Programme Spun at / residual humidity Drying time
Energy
consump-
tion
Iron Dry (Bügeltrock-
en)
1400 rpm / 50% 121 min. 1,31 kWh
1000 rpm / 60% 138 min. 1,49 kWh
Synthetic (Mischgewebe) 3,5 kg
Cupboard Dry
(Schranktrocken)
1200 rpm / 40% 56 min. 0,54 kWh
800 rpm / 50% 64 min. 0,61 kWh
7. OPTIONS
7.1 Dry Plus (Trocken+)
This option helps to get the laundry more
dried. There are 3 possible selections:
- the default selection which is related
to the programme.
- the selection to get the laundry lightly
dried.
- the selection to get the laundry more
dried.
7.2 Anti-crease (Knitterschutz)
Extends anti-crease phase (30 minutes) at
the end of the drying cycle to 90 minutes.
This option prevents laundry from creases.
Laundry can be removed during the anti-
crease phase.
7.3 Spun at RPM (U/Min.)
This option helps to set the best condition
to dry the laundry.
If you know the initial spin speed when
you washed you can use this option.
Higher spin speed causes that the laundry
contains less water.
7.4 Buzzer (Signal)
When the buzzer option is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer option is by default always on.
You can use this function to activate or
deactivate the sound.
You can activate the Buzzer
(Signal) option with all
programmes.
7.5 Time Dry (Zeitwahl)
Operates only with the Time
(Zeitprogramm) programme. Lets the user
to set special time of drying programme
from minimum 10 min. to maximum of 2
hours (in 10 min. steps).
7.6 Delay Start (Zeitvorwahl)
Lets to delay the start of a
drying programme from
minimum of 30 minutes to
maximum of 20 hours.
1. Set the drying programme and
options.
2. Push the Delay Start (Zeitvorwahl)
button again and again.
the necessary time of the delay come into
the view on the display (e.g. if the
programme has to start after 12 hours.)
3. To activate the Delay Start
(Zeitvorwahl) option, push the Start/
Pause button. The time to start
decreases on the display.
ENGLISH
13