Service manual

- Verifythatallinternalhosesdonotleak.

- Inspect the drive belt. Adjust the tension or replace if necessary.

- Check that water does not leak onto the ﬂoor.

- If the heating time is unusually long, check the heating elements. If

the water is very hard, check whether there are lime deposits on the

heating elements. Decalcify the elements if necessary. Adapt the

amountofdelimingagenttothemanufacturer’sguidelines.

- Never switch on the heating elements when there is no water in the

machine. This will cause the slow-blow fuse to trigger.

- Inspect the shock absorbers and coil springs. (Only EX- and

H-model).

Preventive maintenance