Service manual

Troubleshooting

Fault code 15, EMERGENCY STOP

This fault code is generated by the programming CPU board. The fault

code arises if the emergency stop switch has been activated on the mach-

ine.

The cause can be inadvertent activation of the emergency stop, defective

emergency stop switch, incorrect or shorted cable, etc.

Fault code 17, DOOR LOCK

This fault code is generated by the programming CPU card. The fault code

arises if the door lock is locked at the start of the wash program, i.e. that

the door is locked although the CPU board has not requested locking. This

fault code will be shown if one try to start a program when the DLCU has

given a fault code.

Fault code 18, START NOT ALLOWED

Themachine’sprogramunithasbeendisabledbyasuperiormonitoring

system.

Actions

• Getintouchwiththesupplierofthemonitoringsystemforpossible

causes of the monitoring system disabling operation of the wash machi-

ne.

Fault code 19, MASTER COMM.

Communication with superior system has been broken. The cause can be

a fault in the network connections, damaged cable, defective monitoring

system, etc.

Action:

• Firstly,contactthesupplierofthemonitoringsystemforpossiblecau-

ses of the monitoring system not communicating.