Service manual

48
Engaging servicemode
Service mode is engaged by using one of the
following alternative:
Alt. 1 Service switch on the CPU board under
the top cover on the front of the machine.
Alt. 2 Service switch on the I/O board at the
rear of the machine to the right of the
electrical connection.
Alt. 3 Service switch on the CPU card will be
activated via a link arm which can be ac-
cessed from the front below the top front
panel. (On machines with coin counting
only.)
Press the service switch for about 2 seconds.
The machine software will now switch to its
service mode. The display lists the submenus
available in this mode.
This service manual describes the functions
and programming instructions for the following
submenus:
• SERVICE
• CONFIG1
• ACTIVATEWASHPROGR.
• I/OADDRESS
For other submenus, please refer to the pro-
gramming manual.
Tosavechangestothemachine’sashmemory,
they must be confirmed in a menu that is dis-
played automatically whenever a change has
been made and you are exiting the menu.
4
5
6
            
6638
Alt. 3
6204
5
6
6204
6580
4
6582
SAVE TO MEMORY
YES
MAIN MENU
01.00.00.00
SERVICE
PARAMETER PROG
STATISTICS
CONFIG 1
CONFIG 2
Alt. 2
Alt. 1
Program unit