Service manual
57
6204
30
31
6204
32
6204
33
6204
CONFIG 1
04.01.00.00
PAUSE PERMITTED
RAPID ADVANCE
NEW PROG. SELECT
SHOW TIME
SHOW TEMP
CONFIG 1
04.01.00.00
PAUSE PERMITTED
YES
CONFIG 1
04.34.00.00
MAX FILLTIME, SEC
0600
SAVE TO MEMORY
YES
• TIMEOUT,PAUSEBUZZ.SEC 10
• MAX FILL TIME, SEC 600
• 6. WATER IN DRUM YES
• 7.DRUMOVERFILLED YES
• 10. DRUM NOT DRAINED YES
• MACHINE ADDRESS 0000
• PASSWORD 0000
• SHOW WEIGHT TIME, SEC 30
• MAXDIFF.WASH TIME MIN 10
• DEFAULT HEAT YES
• BACK LIGHT TIME SEC. 0000
• OFFS.LEVELREADINGMM 0000
• DISPLAYWARNING,SEC 0000
• FLUSHDELAY,LIQ.SEC 0000
• FLUSHON,LIQ.SEC 0000
• FLUSHDELAY,POWD.SEC 0000
• FLUSH ON, POWD.SEC 0000
• LEVELCOOLDOWN,SCU
• COOL STEP TEMP
• COOL MIDDLE TEMP
• DISPLAYSTATIST.SEC. 0000
• SHOWSTAT.DOUBLECLI. 0030
• LASTPROG.TIMEOUT
• DRYCOM.PORTCPU
• DRYCOM.PORTI/O
• QUICKSTARTBUTTON1
• QUICKSTARTBUTTON2
• VOLUME
• VGBWELC.TIMEOUTSEC. 0000
• VGBMESS.ANTICR.SEC. 0000
• SERVICEINTERVALHOUR 0000
Select the desired function/parameter and press
the knob.
To engage and disengage functions, turn the
knobtoselectYESorNOandthenpressthe
knob.
To adjust the value, set the value and press the
knob. The arrow in each menu shows the co-
lumn to be adjusted.
• Turntheknobclockwisetosetthedesired
number between 0 and 9.
• Turntheknobanticlockwisetomovetothe
next column. Turn the knob clockwise and set
the value, etc.
• Onceallthecolumnshavebeenset,press
the knob to confirm and go back to the config
menu 1.
When all the relevant values have been adjusted,
select EXIT and press the knob.
Conrmthechanges(writetomemoryYES/NO)
and return to the main menu.
Note!
All changes will be executed only after exiting
the CONFIG 1 menu.
30
31
32
33
Program unit