Service manual

93
Door and door lock
Replacing the door lock
1. Take down power from the machine by turning the main power switch
to the 0 position.
2. Remove the front cover alt. side pole.
3. Remove the door (two screws in each hinge).
4. Remove the front panel.
5. Remove the door lock (three holding screws).
 6. Verifythestrappositionsonthecableforthelock.Cutthenecessary
straps to undo the cables leading to the lock.
7. Undo the connectors.
8. Replace the door lock.
9. Reconnect the new (door) lock.
10. Assemble in reverse order.
11. Strap the cables for the lock according to the notes made in step 6.